intelligent water pump control panel

Without a backup battery, when the network power is cut off, the device cannot receive and send SMS/calls and the alarm will also fail!

0- The electrical panel, is supplied with it without a battery and electrical circuits. It also has the ability to send appropriate responses.

Agricultural pumps are usually installed and operated far from the place of residence. Due to the lack of continuous monitoring, there is a risk of cables, pumps and other expensive equipment. By installing sensors or special keys, unauthorized entry is notified to the user with an alarm or call/SMS.

0- No alarm and related equipment, not installed and activated.

1- Keypad: By installing a key with an input (or microswitch) of the tool, unauthorized entry causes a sound and sends an SMS and calls the user.

2- Weight sensor: When there is a large space or no wiring is possible, the use of a weight sensor is recommended. These sensors are generally connected wirelessly to the panel and move when the object moves in front of it, causing the user to be notified.

The purpose of installing a pump and accessories is to deliver water to the farm or garden. A pressure or fluid flow switch is used to verify this. When the pump is turned on but water does not flow, such as when the pump is pulled out of the air, the well is dry, the cable or pump is removed and the pipes are disconnected, the pump blades are damaged, etc., the user is notified.

0- Contactor contact: The contactor is the main switch for turning the pump on and off. When the pump is commanded to turn on, this command ultimately reaches the contactor and the electropump is turned on by connecting the contactor. If the contactor does not connect for any reason, such as a burned coil or a broken wire, etc., the user is notified.It is ten.

1- Pressure switch: To ensure that the pump operates correctly in providing the necessary pressure, a pressure switch is installed on the outlet pipe. When the pump is turned on, if sufficient water pressure is created in the outlet pipe, a signal is sent to the controller.

2- Fluid flow switch: At low outlet pressure, salts in river water or the presence of various valves to direct water to different parts of the ground, the pressure switch may not function properly. Using the flow switch, only when water flow is established in the pump outlet pipe, it indicates the health of the system.

To temporarily move the electric pump, either during repairs or to transfer the pump to storage at the end of the agricultural season, it is necessary to disconnect the electrical connection between the electrical panel and the electric pump.
0- The internal terminal of the panel is used to connect the electric motor to the electrical panel. When disconnecting and reconnecting, it is necessary to observe the order of connecting the wires. Due to space limitations, installing the connections is a bit difficult and requires the use of an experienced technician and special tools.

1- With multiple industrial plugs and sockets, users can easily disconnect and connect the electropump cable without the presence of a technician and also save on some future costs.

0- The controllers installed on the device are without LCD display.

1- Having an LCD display on the controller has the advantage that the current values ​​of input, output, clock, network status, etc. can be seen and seen It gives a better view of the system status.

0- The control panel is made of plastic and ABS with a matte door and has good durability against moisture and electrical connections.

1- By choosing a transparent door panel, the inside of the panel is visible from the outside. With this feature, quick inspection of internal equipment is easily possible.